CLEARANCE 5% OFF
This NXT-GEN POWDER APPLICATION MACHINE is a compact version designed as an in-line addition to your Mimaki, Roland or STS / Mutoh DTF Printer. This machine has been specifically designed to work with the following DTF Printers:
- Mimaki DTF Printers (Mimaki TxF 300-75 and similar models with similar print speeds)
- Roland DTF Printers (including the Roland BY-20 and similar models with similar print speeds)
- STS DTF Printers (STS XPD-724 and similar models with similar print speeds)
- Other DTF Printers with print speeds (up to 90 sq ft per hour)
This NXT-GEN 32C DTF Powder Applicator and Dryer unit can cure DTF rolls up to 32 inches wide and is compatible with your Mimaki DTF Printer.
Available Options:
| NXT-GEN 24R | NXT-GEN 24L | NXT-GEN 32R | NXT-GEN 32L | NXT-GEN 32C | NXT-GEN 32CE |
|---|
 |  |  |  |  |  |
- For DTF Rolls up to 24" Width Wide
- Regular Tunnel
- for all DTF Printers with 1-3 Print Heads
- 760 lbs
- 46" x 44" x 45
- 220V (1800W / 11A)
| - For DTF Rolls up to 24" Width Wide
- Extra Long Tunnel
- for all DTF Printers with 4-6 Print Heads
- 790 lbs
- 96" x 39" x 47
- 220V (1800W / 14A)
| - For DTF Rolls up to 32" Width Wide
- Regular Tunnel
- for all DTF Printers with 1-3 Print Heads
- 800 lbs
- 78" x 51" x 48
- 220V (2000W / 11A)
| - For DTF Rolls up to 32" Width Wide
- Extra Long Tunnel
- for all DTF Printers with 4-6 Print Heads
- 840 lbs
- 90" x 47" x 45
- 220V (2000W / 14A)
| - For DTF Rolls up to 32" Width Wide
- Compact Tunnel
- Designed for Mimaki, Roland & STS Printers with 1-3 Print Heads
- 700 lbs
- 47" x 44" x 45
- 110V (1300W / 12A)
- Slightly less efficient than the NXT-GEN 32CE, but is a good option if you only have a 110V outlet (and not a 220V outlet)
| - For DTF Rolls up to 32" Width Wide
- Compact Tunnel
- Designed for Epson DTF, Mimaki, Roland & STS Printers with 1-3 Printheads
- 700 lbs
- 47" x 44" x 45
- 220V (1300W / 8A)
- Slightly more efficient than the NXT-GEN 32C, and puts less strain on your electrical system, making it the preferable choice for long-term usage
|
| $7,599.99 view item | $8,074.99 view item | $8,549.99 view item | $9,024.99 view item | $8,549.99 | $8,549.99 view item |
Features:
- Advanced Built-in HEPA 2 Layer Dual Air Filters: Filter out any fumes from DTF powder. Low maintenance, easy to replace filters.
- Advanced Film Detector: With the effective film sensor, it automatics turns off and on the power station, and heating elements which results in a lower power requirement.
- Low Power Consumption: 1300W / 12A / 110V - can be plugged into a regular 12A power outlet/socket.
- Advanced powder ventilation within the powder station: Heating fans help reduce any powder build-up in the powdering station, less maintenance.
- Air vacuum conveyor system: There's an air vacuum on the front and end of the conveyor to keep the films from slipping/moving, it aligns the dtf films to get even heating throughout the heater/dryer.
- Advanced Take-Up System: Additional tension bar to roll up the finished dtf films better and compact as needed.
- LED Touch Screen: Easy to monitor and control.
- Pre-Heating: Ensures better ink and power adherence.
- Auto-Powder Recycling: No need to manually recirculate powder.
- Double Heating: Upper & Lower Heating ensures a better quality print+powder curing. Use of high efficiency lamps saves up to 5KW over competing shakers.
Weight and Dimensions (including packaging):
Item #: NXT-GEN-32C
